This can be used to change the
odometer mileage if you need to replace the instrument
cluster and want the mileage to be correct.
Information on how to remove the
instrument cluster and take it apart can be found here:
Insert a small regular(flat)
screwdriver in between the digit wheels and rotate it
clockwise. While doing this you need to make enough of a gap
between the two wheels for their little cogs to disconnect.
The digit on the left side of the screwdriver will increase
by one each time you do this.
Start at the second from the
right (tens) digit and move to the left since each time you
spin a number past 9 the number to the left of it will
© 2019 Drake Smith - Please do
not use or reproduce this elsewhere. Feel free to link
to it though.